|
|
Low Profile Span-Track®
|
Nests Between Beams
Low Profile installs between beams for full use of vertical space. Fits any pallet rack -- available in "to-the-inch" cut lengths. Drop-in design is easy to add to existing rack or to reslot without tools.
Place Span-Track Hangers on front and rear beams to support each Low Profile track. Hangers available for all beam types. Hangers include built-in label holder, labels and end caps.
Place Hangers. Add Track.
Two Steps. One Worker. No Tools!
Rollers at front of track are lower than top of beam, which acts as a carton stop.
Full-width Rollers
Available with 1", 2", or 3" roller spacing
Low Profile Capacities & Lengths
*Standard Low Profile over 10' requires an Intermediate beam, creating two unsupported spans - the longer of the two dictates capacity.
Low Profile Knuckle
Low Profile Knuckle takes the best of Low Profile Span-Track and adds a 20" angle to improve visibility, access, and accuracy at the pick point. The track does it all without altering or adding to rack structure and without consuming precious aisle space.
Each-Pick Made Easy Low Profile Knuckle comes in 9", 12", and 15" track widths. Knuckle Lengths: 12", 16" 20" and 24". Track lengths, load capacities, construction and installation identical to standard Low Profile.
Conquer Space - Track Sits
Entirely Between Beams Slow Down Plate: Plate snaps onto rollers to reduce product speed and back pressure at any point along track. Can be used as impact plate at load end. |
Span-Track 3D
Span-Track 3D for Heavier Loads on Unspported Spans
Low Profile Span-Track 3D with 3" deep side channels (14 gauge galvanized steel) carries loads up to 50 lbs. per ft. on 10' unsupported spans. Span-Track 3D installs between pallet rack beams. Saves vertical space for high density live storage. Order "to-the-inch" cuts to fit existing footprint. Uses two standard Span-Track Hangers per 3D section.  
 |
|
Span-Track in single or double deep pallet rack requires no shelves or intermediate supports.   Span-Track maintains all the features and capacity of your pallet rack and mezzanine. |
|
|
S9 Hangerless Span-Track
S9 Hangerless Span-Track can be added to any standard pallet rack with step beams. It nests between the steps for full use of vertical space. |
 |
Low Profile Each Pick Solutions
|
Adjustable Pick Tray...
Combined with Span-Track's superior carton flow, UNEX's full-bay-width adjustable Pick Tray maximizes view and access in "each pick" applications. Tilted product presentation greatly improves pick rate and accuracy.
Bridge Hangers connect Span-Track sections to Pick Tray. "Drop-in" design makes installation easy. Galvanized steel Pick Tray is rated at 50 lbs./ft. Pick Tray Widths: 5ft. to 10ft. Standard Depth: 18" and 24" with a 2" or 4" front stop. Optional label holder attaches to tray front. 
...and Add-On Tray
Attaches to existing rack without adding uprights, beams, or posts. Works with Low Profile Span-Track for optimal "each picking". Add-on Tray greatly improves view, access, and pick rate.
Galvanized steel tray holds 50lbs./ft. Add-on Tray Widths: 3ft. to 8ft. Standard Depth: 12" and 15" with a 2" front stop. Label holder attaches to tray front.  |
  |